PoolLink^® 1000 Series

Specifically designed for commercial pools and spas, the PoolLink^® series automates control of ph and ORP/ppm levels. A specialized microprocessor is at the heart of every model in the PoolLink 1000 Series. Utilizing this technology allows the controller to perform complex and exceptionally accurate control functions with the benefit of easy setup and operation.

True proportional dosing, Ease of use, Two-level controls, Advanced Features, Savings, Remote monitoring and operation, Safety, Bottom line, Models and Features

True Proportional Dosing
Poollink performs continuous monitoring and correction that is based on the water's actual demand. Incremental testing and treatment based on demand is called proportional dosing and is not found in most controllers. Proportional dosing results in more precise and economical treatment.

Ease of Use
No knobs, or screwdriver adjustments to make. All values are entered with a simple keypad. The backlit liquid crystal display (LCD) shows the current pH, ORP, ppm and temperature. The operation that the controller is currently performing is also displayed ... in simple language.

Two-level Controls
The basic operating functions are available to all operators ... allowing the ideal pH and sanitizer setting in addition to other primary operational function to be adjusted within alarm limits.

A second level of operation is accessed with a special keypad combination. This allows the lead operator to alter alarm values and have full programming access.

Advanced Features
The time is takes chemicals to completely mix into the water varies from pool to pool and spa to spa. Without some method of accounting for the variance, a controller that works well on a large pool, may overdose on spas. Thus, PoolLink incorporates separate and adjustable mixing times for pH and sanitizer. This is Dynamic Proportional Mix time Compensated (DPMC) control and leads to precise treatment of any sized body of water.

Savings
In addition to providing water that is consistently balanced and pleasant for swimmers, the use of a PoolLink will reduce the time spent controlling pool chemistry; freeing more time for other tasks. DPMC control reduces changes in chemistry which use or necessitate more chemicals. Operators often see reductions in chemical use of more than 30%. Maintaining the pH will help protect pumps, filters and pool walls from corrosion and scaling. The control is 24 hours a day, and the savings can cover the cost of a PoolLink in a short time.

Remote Monitoring and Operation
Since PoolLink is microprocessor based it can be linked to a computer - down the hall or on another continent. SiteLink™ is a PC based program designed specifically for remote communication with Link Automation equipment. Everything that can be done from the faceplate - and more -  can be done from your office or home.

Direct access to the PoolLink 1300 over a phone line or RS-232 connection will give the operator up-to-the-second information.  The current chemistry levels, alarm settings and controller history is just a phone call away. The entire set of operating parameters can be transferred to the PC for review and alteration, then sent back to the PoolLink 1300. SiteLink allows the operator to scroll through PoolLink's menu structure and alter settings just as is done in the equipment room.

Safety
An array of alarm and overfeed protections are operator adjustable. In the event of a power loss, PoolLink retains all alarm values and settings in flash memory - no battery to replace. PoolLink even monitors itself; automatically performing self tests and diagnostics.

Bottom Line
The PoolLink 1000 series provides excellent water chemistry control and is easy to operate, but is it expensive? No, top quality microprocessor based control should not be expensive. Compared to functionally equivalent controls, the PoolLink series is competitively priced.

Our philosophy is this; new technology must bring about advancements in functionality and control, but not an increase in cost.

Models and Features